Pion Design Mister Tom's Treasures Vintage Car Cards

 

Hi blogging friends 😄

I continue to be very busy in my Craft Room whipping up masculine cards for all those birthdays our family has in August plus one for Father's Day in September.  This time, I pulled out my Pion Design Mister Tom's Treasures Designer Papers which I bought on clearance not too long ago.  They are from 2016 and I really love them because they are just a classic design.  None of the men in our family are into fishing, play sport, gaming or drinking so I am always after designer papers that aren't any of those things.  

Pion Design closed at the end of 2023 and I really, really miss them.  Their vintage-inspired papers were so unique and it really left a hole in the market.

Anyhow, onto the first of my 3 cards:

This card is also for the following Challenges - click on the underlined link to take you to the Challenge:

• A Perfect Time to Craft - August - Challenge #8 - Anything Goes

• Crafty Catz - Challenge #699 - Anything Goes

This card is for my husband for Father's Day which is in September here in Australia.  The vintage car was trimmed from one of the Pion Design Mister Tom's Treasures designer papers then layered onto Kaisercraft Shadow Cardstock.  I ink-blended around the edges using Ranger Antique Linen Distress Ink and my Ink Blending Tool which was fitted with a Domed Pad.

On a whim, I decided to stamped around the edges of this main panel using Antique Linen Distress Ink and two stamps:  Uniquely Creative Longhand and Kaisercraft Vintage Clocks.  You can see a close-up of the stamping here:

I really like how that simple bit of stamping just added something to the whole vintage-vibe that I was trying to create.

The centre panel was dry embossed using my Big Shot and a free Mini Embossing Folder that came with a UK Papercraft Magazine.  I also ink-blended the panel with Antique Linen Distress Ink.

Both the top and bottom designer paper are by Authentique - Manly - which is from 2020.  

The sentiment was also trimmed from the same Pion papers, ink blended with Antique Linen Distress Ink then popped up on scraps of white cardstock.  I added some Inque Boutique Brads to each corner.  This pack of brads has a variety of tarnished metal colours and suited the vintage theme really well.  Lastly, I glued my card front to a Cream Card Base using Tombow Mono Multi Glue.

And here is a pic of the inside:

Both the sentiment and vintage car are by Stampin' Up from a retired set called Guy Greetings.  I stamped them using Stampin' Up Night of Navy Ink and used a Stamp Positioner so I could stamp the images several times.

Here is my 2nd card:

The vintage car is again from the Pion Design Mister Tom's Treasures Designer Paper.  I layered the car onto some Pion Design Brown Designer Paper then onto Kaisercraft Grey Cardstock which has brown tones in it and matched really well.  I stamped around the Vintage Car using the same stamps and ink as my first card.

The centre strip of designer paper and the sentiment is from Mister Tom's Treasures - Borders.  The top designer paper is Pion Design and the bottom is by Authentique - Manly.  I again added Antique Linen Distress Ink to all the edges.  I added the Inque Boutique Brads to each corner which are a lovely burnished copper colour and matched the car perfectly.  I glued the card front to a Cream Card Base using Tombow Mono Multi Glue.

Here is a pic of the inside:

I used the same Stampin' Up set as Card #1 but used Ranger Archival Potting Soil for the stamping.

And now for Card #3:

Everything was done pretty much the same as the previous two cards.  The Dark Brown Cardstock is from my stash.  The top and bottom designer paper is by Authentique - Manly.  The centre strip of designer paper is by Pion Design.

I forgot to add the brads before I glued the card front to my Cream Card Base - oh well......

Here is a pic of the inside:

I used Stampin' Up Early Espresso ink for the stamping.

It was really good to do three cards using the same layout and mostly the same supplies so I could get them done as soon as I could as I have a few more masculine cards to do yet.

Finished size of all three cards is 5-3/4" x 3-15/16" or 146mm x 100mm.

Thanks for visiting my blog today.

Jocelyn

Card Recipe:

Card #1:

Stamps:  Stampin' Up Guy Greetings #137178 (retired) - card inside, Uniquely Creative Longhand UC1832, Kaisercraft Vintage Clocks DD904

Ink:  Ranger Antique Linen Distress, Stampin' Up Night of Navy (card inside)

Designer Paper:  Pion Design Mister Tom's Treasures (2016), Authentique Manly #MAN010 6" x 6" (2020)

Accessories:  Big Shot, Embossing Folder - free with magazine, Ranger Ink Blending Tool + Domed Foam Pad, Inque Boutique Brads, Cardstock - Kaisercraft Shadow + Scraps of White + Cream Card Base, Tombow Mono Multi Glue, Stamp Positioning Tool

Card #2:

Stamps:  Stampin' Up Guy Greetings #137178 (retired) - card inside, Uniquely Creative Longhand UC1832, Kaisercraft Vintage Clocks DD904

Ink:  Ranger Antique Linen Distress, Ranger Archival Potting Soil

Designer Paper:  Pion Design Mister Tom's Treasures (2016), Authentique Manly #MAN010 6" x 6" (2020)

Accessories:  Ranger Ink Blending Tool + Domed Foam Pad, Inque Boutique Brads, Cardstock - Kaisercraft Grey + Scraps of White + Cream Card Base, Tombow Mono Multi Glue, Stamp Positioning Tool

Card #3:

Stamps:  Stampin' Up Guy Greetings #137178 (retired) - card inside, Uniquely Creative Longhand UC1832, Kaisercraft Vintage Clocks DD904

Ink:  Ranger Antique Linen Distress, Stampin' Up Early Espresso

Accessories:  Ranger Ink Blending Tool + Domed Foam Pad, Cardstock - Dark Brown + Scraps of White + Cream Card Base, Tombow Mono Multi Glue, Stamp Positioning Tool

Stampin' Up Dasher Christmas Gift Card holder

Hi blogging friends  

Well, my little Stampin' Up Dasher stamp is getting a work-out this Christmas season - you will be tired of seeing him!   I was really looking for an excuse to use my new Marianne Design die (an early Christmas present for me!) - oh my goodness, I LOVE it - it is so pretty and lacey - and as I have stamped a whole lot of circles with Dasher ready to pop on cards, the image was going to fit the diecut perfectly.  A match made in heaven!!  Love it when that happens!

This particular card is going to the family member that we picked out of the hat from our family's Secret Santa Sibling draw.  We don't buy presents for each sibling/sibling-in-law at Christmas.  Every November, everyone fills in a form of their "most eagerly desired gift" (we usually list 4 choices) and we put all the forms in a hat, pick one out and spend a decent amount for that one person.  With family spread all over Australia, many of us just ask for a Gift Card because it is much cheaper to post than something big and heavy.

Of course, all the little nieces and nephews get a Christmas present - and I LOVE to watch the delight in their little faces as they tear open the wrapping paper - and honestly, if I got nothing for Christmas, it wouldn't worry me:  just seeing my own daughter and the nieces/nephews have so much fun is a gift enough in itself.  They are only little for such a short time!  Anyway, onto the card itself............

Dasher is stamped with Colorbox Sapphire Silk pigment ink and heat-set with Satin Pearl clear embossing powder.  And I popped the usual tiny red rhinestone on his nose to turn him into Rudolph.  This main panel is up on dimensionals.

The burgundy side panel was embossed with my Big Shot and one of the folders from the Sizzix Winter Set #3 which I thought matched Dasher's antlers really well the way the embossing looked all swirly. 

I diecut some snowflakes and inked the edges with Sapphire Silk ink, added Ice Blue rhinestones and popped them up on dimensionals, then added the same colour rhinestones to the bottom RHS.

Before I did the card inside, I picked up the card to show my DH only to realise that my card opened backwards!  Yep, my frequent trick of NOT checking that I am layering the front of the card the way that I should.  Ack - I can't believe how many times I do it!!  Still, it is not hard to fix as I just cut the front panel off and stuck it to another card base; it's just annoying and takes up time - and at least I didn't do the card inside before I found out - or you would be hearing my screams from here 'cos it HAD to be in the mail THAT DAY!!

The card inside:

I used the same Marianne die for the sentiment panel and inked the edges of the white cardstock circle lightly with the Sapphire Silk ink and heat-set it so I didn't smear it (it takes quite a while to just air-dry and I have no patience!!).   The sentiment is a Kaisercraft clear stamp and was stamped with Sapphire Silk ink and heat-embossed with Satin Pearl embossing powder.  This Kaisercraft sentiment set is good value as they are around $2.00 and you get 4 different Christmas sentiments all in different fonts - plus they have a good range of sentiment sets to suit every occasion so I have a whole bunch of them.

Where the gift card tucks in, I stamped the Hero Arts Holiday Background stamp with Versamark Watermark ink onto the burgundy cardstock, diecut the ice blue cardstock using a Nellie Snellen border die which seemed to match the other Marianne die quite nicely and adhered just the bottom and sides of the panel so that the Coles/Myer Gift card tucks in nicely.  Here is a close-up pick of this section:

Finished card size is 5" x 5" or metric about 12.5cm x 12.5cm

Challenges:

I am entering my card in the following challenges -

The ABC Challenge - F is for Frosty - Use snowy scenes, snowflakes, a snowman, or anything you can think of to get your frosty fun out.

Papertake Weekly Challenge - Last Christmas Card of the Year - this is their final festive challenge for the year.

My daughter is hoping for a white Christmas but well, it is Summer here and it is far more likely to be boiling hot!  Although I do remember one Christmas where it did actually snow on the Alps in my State and it was bitterly cold where we live - just a freak of nature that day!

My daughter loves snowmen and all things snowy as much as I do and this year, she wouldn't let me display my two (stuffed) snowmen that I always put out with the Christmas decs; she has taken them to bed with her every night instead!  They are about 12 inches (30 cms) tall and I usually put them up high on top of my buffet and hutch because my cat Ruby likes to grab them in a smothery hug and kick them with her back feet and bite them like it is some sort of prey that she has caught.  Looks cute but they wouldn't last long with that sort of treatment.  I have a sneaking suspicion that when all the Christmas stuff is packed away, they will still be sleeping with my daughter!!

Thanks so much for stopping by!

Jocelyn

Card Recipe:

Stamps:  Stampin' Up Dasher, Kaisercraft Mini CS926 Christmas clear stamp set, Hero Arts Holiday Background CG-324 Cling Rubber

Ink:  Colorbox Sapphire Silk pigment, Versamark Watermark

Designer paper:  Echo Park - Wintertime

Accessories:  Big Shot, Marianne Design die CR1201 (lacey circle), Nellie Snellen border die MFD 023, Spellbinder Circle Nestabilities, satin pearl clear embossing powder, heat-gun, Basic Grey red rhinestone, Kaisercraft Ice Blue SB774 rhinestones, dimensionals, sparkly ice blue ribbon, Spellbinder Circle Nestabilities, Sizzix Textured Impressions Winter Set #3 embossing folder, My Favorite Things 'Let it Snowflake' Die-namics dies, cardstock:  burgundy, ice blue, white

Stampendous Star Lilies + Nellie Snellen Multiframes and border dies!

Hello Blogging friends!  

I made a Mother's Day card using a fabulous sketch from Taylor Von Bruggen of Taylored Expressions (USA) from way back on June 11, 2010:  Sketch Challenge #117.  I am a big fan of Taylor's Sketches and a few days ago, downloaded her 2 x Sketch Books which are on the RHS of her Blog listed under the Baker's Dozen Design Team members.  It is a PDF file so you will need Acrobat Reader (free download from the Web) to open it.  I have a folder with Sketches which I love to look through when my mojo has gone missing or I just need some inspiration.  THANKS Taylor!!

Anyway, onto the card.  The stamp is a beautiful NEW stamp by Stampendous called "Star Lily" and was coloured with Derwent Coloursoft and Prismacolor pencils + OMS.  It was really easy to colour as I just coloured the centres of each petal and left the white as highlight.  I added a tiny bit of pink here and there on the leaves and stems which was something I learnt from my Decorative Painting teacher many years ago.  If you add some of your flower colour to leaves, it really "lifts" the whole picture.  I didn't draw on the colour with my pencils: I just used my paper stump that already had the pink colour on it + OMS, and just "smudged" it on.  I lightly coloured around the image with blue chalk.

I decided to add some fun flock to the pollen on the stamens.  At first, I added some glitter, but it didn't look right, so I scraped it off and went with the flock instead.   Here is a close-up piccy:

The rosepink punched border was made with one of my NEW Nellie Snellen border dies - you get 2 in a pack.  Isn't it pretty?!!  You use the same sandwich in your Cuttlebug as for Spellbinder Nesties: A plate, C plate, die, cardstock, B plate.  I added a Scor-Pal line just above the punched border (bit hard to see in the photo).

I ran the designer paper through my Cuttlebug using my Jamara embossing folder just because I LOVE texture - but really any folder of a similar nature would work equally as well.  The ribbon was attached in 2 separate elements, and the bow itself was made with my Bow Easy.

I added the tiny punched hearts which are the leftover punchies from using Arrows border punch (you know how much I love these little hearts LOL!!)

And here is the card inside:

I used the largest of my Nellen Snellen Doily Flower Multiframes to diecut the rosepink cardstock, and the matching plain circle (from the same dieset) to diecut the sentiment circle.  The sentiment is a retired Elzybells stamp.  And those tiny hearts just had to added!

Check out the button!  I used a new product called the Epiphany Button Studio which is for making your own buttons, ie: you buy the matching clear see-through buttons (in my case, I used 20mm buttons) and peel off the film to reveal a sticky side.  You slide your cardstock or designer paper into the Button maker, put the button on top (sticky-side down), then press the top of  the Button maker and it punches your cardstock/dp to the same size as the button, sticks the button to it and punches the centre holes.  Confused?  Well, here is a video from You Tube - I am a visual learner, so found this easier......  I tried to "embed" the video, but couldn't work it out, so I'll just have a link here for now and try to work it out later.  It really is a very easy product to use and great if you need a matching button, but don't have one in your stash.  

And there is even a flower button maker - this is next on my list of "must-haves".  The size is 20mm.

You-Tube video of how to use the Epiphany Button Studio button-maker

Here is a close-up of my button.  I used the same rosepink cardstock to make my button and threaded some pink and white twine through then popped it up on 2mm mounts (dimensionals):

Phew - that was a long post!!  Thanks for stopping by!

Jocelyn

Card Recipe:

Stamps:  Stampendous Star Lilies CRP115 foam-mounted cling rubber

              Happy Mother's Day sentiment - from Kaisercraft CS916 Occasions clear set of 3

              Beautiful Day - Elzybells 03-252 (retired)

Ink:  Memento Tuxedo black

Designer paper:  Daisy d's Sweet Baby Jane Collection - Sleepy time

Accessories:  Cuttlebug, Nellie Snellen dies: Doily Flower MFD020 and Border 2 MFD023, Cuttlebug Jamara embossing folder, Scor-Pal, Bow Easy, grosgrain ribbon, pink/white twine, OMS, Derwent Coloursoft and Prismacolor pencils, paper stumps, 2mm mounts, Kaisercolour chalk, Stampendous Fun Flock - Lemonade yellow, Designer Dries clear adhesive (for the flock), Epiphany Button Studio 20mm, Button Studio clear round buttons 20mm, cardstock: rosepink, KW Doggett "Knight" white

Punches:  Stampin' Up corner punch, EK Success Arrows border punch