Penny Black Love Tail Valentine's Day Card

 

Hi everyone,

Today I am sharing a Valentine's Day Card that I made for my daughter:

This is also my card for the following Challenges:

• Penny Black Saturday Challenge - February - Anything Goes or Romance

• Splitcoaststampers - Free for All Friday F4A833 - Valentine

• Critter Crazy Challenge #107 - Anything Goes - with a Featured Critter (real or fantasy)

• We Love Stamping - February - Hearts or Anything Goes

The main image is by Penny Black - Love Tail - which is from 2006.  I still love this image as much as the day I bought it!  I stamped it using Versafine Onyx Black Ink onto Ranger Watercolour Cardstock, then coloured it using Zig Clean Color Real Brush Markers using a Zig Blender Pen for all my blending instead of water.  I only recently found out that Zig makes this Blender Pen and this was my first try out with using it.  I absolutely LOVE it and it is so easy to use.

I went around the image with a Lyra Sky Blue Watercolour Pencil.  First, I scribbled the pencil onto some scrap watercolour cardstock and added some water, then picked the colour up with my #4 Round Paintbrush and smooshed it around so it is very light but takes away the stark white of the watercolour cardstock.  I went over the image with an Anko 0.05 Black Pigment Pen to darken up the black lines.  Here is a close-up:

I diecut the image using a QuicKutz Nesting Card Templates Die and my Big Shot, then diecut the next size up from Colormates Dark Racy Raspberry Cardstock.

All the designer papers are by Simple Stories - Love and Adore - which first came out in 2016 so are 10 years old.

The sentiment is by Lawn Fawn - Love Letters - and was stamped using Versafine Onyx Black Ink.  I diecut the panel using a Lifestyle Nesting Circles Die, then diecut the scalloped circle using a Spellbinders Petite Scalloped Small Circles Die.

The main image panel is popped up on scraps of white cardstock and the sentiment is popped up on the top and RHS with 1mm Self-Adhesive Doublesided Foam Pads.  The bottom LHS of the sentiment panel is glued flush to the main image panel.

I punched some tiny hearts from Dark Racy Raspberry Cardstock using my EK Success Arrows Border Punch.  The leftover punchies look like tiny hearts and are perfect for adding a little something extra to your card.  I glued three around the sentiment and two on the main image panel using Art Glitter Glue fitted with a fine nozzle.

I thought about adding a ribbon or some rhinestones but didn't really have the right colour to match so just left the card as-is; I guess I am just keeping it simple.

Once I had finished my card front, I glued it to a White Kaisercraft Card Base using Tombow Mono Multi Glue.

As a final touch, I added some Uniquely Creative Clear Sparkle Brush to the hearts and flowers as well as the tiny hearts.

Thanks for visiting my blog today!

Jocelyn

Card Recipe:

Stamps:  Penny Black Love Tail 3608J Wood-Mount (2006), Lawn Fawn Love Letters LF1292

Ink:  Versafine Onyx Black

Designer Papers:  Simple Stories Love and Adore 6" x 6" #7614 (2016)

Accessories:  Big Shot, Zig Clean Color Real Brush Markers + Blender Pen #999, #4 Round Paintbrush, Lyra Sky Blue Watercolour Pencil, Uniquely Creative Clear Sparkle Brush, 1mm Self-Adhesive Doublesided Foam Pads, Tombow Mono Multi Glue, Art Glitter Glue, Stamping Platform, Anko 0.05 Black Pigment Pen, Cardstock - Black + Scraps of White + Colormates Dark Racy Raspberry, Kaisercraft White Card Base

Dies:  All retired - QuicKutz Nesting Card Templates DC0431, Lifestyle Nesting Circles, Spellbinders Petite Scalloped Small Circles Nestabilities S4-117

Punches:  EK Success Arrows Border (retired)

Penny Black Stuck on You Valentine's Day Card + Essentials by Ellen Bear Hugs Felt Bear

 

Hi everyone 😊

Today I am sharing the Valentine's Day Card that I made for my daughter as well as a little felt Bear that I sewed:

If you have been a regular visitor to my blog, you know that I just adore the Penny Black critters.  They are so fun and easy to colour.  I stamped the cat using Versafine Onyx Black Ink onto Ranger Watercolor Cardstock and coloured him/her using Lyra and Faber-Castell Watercolour pencils + Derwent Inktense pencils and my #4 round paintbrush.  I went over the black lines of the image with a Black Copic .03 Multi-liner to crisp them up after my watercolouring.

I diecut the cat with a Lifestyle Nesting Circles Die and my Big Shot then layered it onto Light Teal Cardstock that I diecut using a My Favorite Things Pierced Circle Stax Die-namics.  The Rose Cardstock was diecut using a Spellbinders Petite Scalloped Small Circles die.  This main panel was popped up on scraps of cardstock.

The Rose Cardstock across the middle was dry-embossed using an old embossing folder by Cuttlebug from a set called 'With Love' which has 5 embossing folders - all borders.  I love to use old supplies from my stash.  I still get such a kick out of using my Cuttlebug embossing folders.  The Swiss Dots folder was the first one that I ever bought and I still use it on a regular basis.  

The sentiment is by TPC Studio - Hugs and Kisses which is long retired.  I bought it from my local scrapbooking store here in Australia many years ago.  I stamped it using Versafine Onyx Black ink onto the same Ranger Watercolor Cardstock then diecut it using a Spellbinders Labels Trio die.   I went around the edges using Versacolor Raspberry Ink as it just needed a little something to match the rest of the card.  I popped the sentiment up on dimensionals.  

The designer papers are by Simple Stories - Love and Adore - from 2016 and therefore long-retired.

The light teal cardstock on the card base was trimmed to 1/16" using my We R Memory Keepers Perfect Layers Guides.  The rose cardstock was trimmed to 1/8".  

I used an EK Success Arrows Border Punch to punch tiny hearts from Rose Cardstock.  They are the leftover punchies after using the punch and look like tiny hearts.  Again, if you are a regular visitor to my blog you will know that I use these leftover punchies all the time for my tiny hearts.  I glued 3 around the image and 2 around the sentiment using Tombow Mono Aqua Glue.  I added Kindyglitz Crystalina Glitter Glue to those hearts as well as the cheeks on the cat and the heart on the envelope.

Lastly, I glued the card front to a White Card Base.  Finished size is 123mm x 123mm or 4-13/16" x 4-13/16".

***************************

I made a cute Felt Bear to go with the card:

Isn't the bear just soooo darned ADORABLE?!!   I used a die from Essentials by Ellen called Bear Hugs and Wool Felt from my stash.  I sewed everything using 3 strands of DMC Stranded Cotton and it was super-easy to put together.  The leaves and flower were diecut using some free dies that came with an order from Sunny Studios and were glued on with Helmar's Fabric Glue.  Here is a close-up:

The eyes and nose are part of the Essentials by Ellen die set and were also glued on using Fabric Glue.  I embroidered the mouth using Black DMC Broder 25 Thread.

I stuffed the bear using Fiber Fill.

I am sure I will be making more of these bears as this die set has a present in the set which you can use for Birthdays or Christmas.

Hope you had a lovely Valentine's Day!  Thanks for visiting my corner of the world😃

Jocelyn

Card Recipe:

Stamps:  Penny Black 'Stuck on You' 30-062 clear set, TPC Studio 'Hugs and Kisses' ST94019 clear set (retired)

Ink:  Versafine Onyx Black, Versacolor Raspberry Pigment #156

Designer Papers:  Simple Stores Love and Adore #7614 6" x 6" pad (from 2016 - retired)

Accessories:  Big Shot, Cuttlebug With Love Embossing Folder 37-1171 (retired), Dimensionals, Scraps of White Cardstock, Rose + Light Teal Cardstock, Ranger Watercolor Cardstock, WRMK Perfect Layers Guides, #4 Round Paintbrush, Lyra + Faber-Castell Watercolour Pencils, Derwent Inktense Pencils, Tombow Mono Multi + Mono Aqua Glue, Kindyglitz Crystaline Glitter Glue, Copic .03 Black Multi-liner

Dies:  Spellbinders Labels Trio S3-147 (retired), Spellbinders Petite Scalloped Small Circles Nestabilities S4-117 (retired), My Favorite Things Pierced Circle Stax (retired), Lifestyle Nesting Circles

Punches:  EK Success Arrows Border

*************************

Felt Bear Recipe:

Accessories:  Wool Felt in various colours, Fiber Fill, DMC Stranded Cotton, DMC Black Broder Cotton, Big Shot, Helmar's Fabric Glue, Sewing Needle

Dies:  Essentials by Ellen - Bear Hugs by Julie - EEDIEJ-097-17, Sunny Studio Flower and Leaf Dies (free with order)

Simple Stories Hello Lovely Valentines Day Card

 

Hi everyone 😀

Today I am sharing a Valentines Day card that I made for my daughter:  

I used a Simple Stories Card Kit called 'Hello Lovely' but made a couple of changes.

I changed the sentiment and added some Stampin' Up! and Echo Park Enamel Dots in matching colours.  I also punched some pale pink glitter hearts using a Carl CP-8 Heart Duo punch and glued them between the butterflies.  I used my 1/2" Corner Chomper to round the right-hand corners.

All the layers were glued down using Tombow Mono Multi glue.

Not that you can see in the photo but I added some glitter using my Quickie Glue Pen and Bellbird Paperarts Diamond glitter.  It looks so pretty in real life.  

I am sick with COVID at the moment which is frustrating.  It took me a year to get over my last bout having just got my stamina back in December but would still get really tired.   Hopefully I will bounce back more quickly this time.  

Thanks for visiting my blog today.

Jocelyn

Card Recipe:

Stamps and Ink:  None

Accessories:  Simple Stories Card Kit - Hello Lovely, Enamel Dots - SU and Echo Park, We R Memory Keepers 1/2" Corner Chomper, White Card Base, Pale Pink Glitter Cardstock, Tombow Mono Multi Glue, Quickie Glue Pen, Bellbird Paperarts 008 Diamond Glitter

Punches:  Carl CP-8 Heart Duo 

Penny Black Don't Break It Anniversary Card

Hi everyone 😀

It is my husband's and my 34th Wedding Anniversary and this is the card that I made for him.  My husband is easy to make cards for because he doesn't mind cute and cuddly critters so that makes life a little easier.  The Penny Black critters are so timeless and adorable - and I have been using their critters for years and years.

The main image is called 'Don't Break It!' and is wood-mounted - and still readily available.

This is also my card for the following Challenges:

Penny Black Saturday Challenge - April - Anything Goes - Optional of Something Funny

Crafty Catz Weekly Challenge - #632 - Anything Goes - Optional Twist of Something Blue

Splitcoaststampers - Ways to Use It - WT920 - Teddy Bears

I stamped the image using Versafine Onyx Black ink and coloured it with a mix of Jasart Voyager watercolour paints and Faber-Castell watercolour pencils using a #2 round paintbrush.  I added some Glossy Accents to the heart that the teddy bear is holding.   I went over the black lines of the image with a Zig Millenium .005 black pen which had lost some of their blackness from the watercolouring.  The hearts around the image and sentiment are a mix of Sizzix Drifting Hearts Thinlets and leftover punchies from using my EK Success Arrow border punch.  I cut them from some of the designer paper.

The designer papers are really old - from 2012 - and are by Bo Bunny - Love Letters from their 6" x 6" paper pad.  Although you can no longer get them, there are so many Valentine's Day releases that you could substitute.

I diecut the main image using a Lifestyle Nesting Circles die using my Big Shot.  The red circle underneath was diecut from one of the designer papers and the black circle is American Crafts black cardstock.

I added a strip of black cardstock underneath the image and it looked like it needed something so added some dry embossing using a Cuttlebug/Provocraft Love Language embossing folder.

Here is a close-up of that adorable teddy-bear:

The sentiment is by Colorado Craft Company - Lots of Love and was stamped using Versafine Onyx Black ink.  I diecut it using a retired Spellbinder Labels Trio Shapeabilities die S3-147.   I added some more tiny hearts from my EK Success Arrows border punch.  All the hearts were glittered using my Wink of Stella clear glitter brush which adds some subtle sparkle so it is isn't too tizzy for a guy 😉

Both the main panel and sentiment are up on dimensionals.  Once I had finished the card front, I attached it to a white card base.

Thanks for visiting my blog today.

Jocelyn

Card Recipe:

Stamps:  Penny Black 'Don't break it!' 3605F wood-mount, Colorado Craft Company 'Lots of Love' AJ418 clear set

Ink:  Versafine Onyx Black

Designer Paper:  Bo Bunny Love Letters 6" x 6" pad (2012) - retired

Accessories:  Big Shot, Ranger watercolour cardstock, Cuttlebug/Provocraft Love Language embossing folder (retired), dimensionals, Tombow Mono Multi glue, Wink of Stella clear glitter brush, Glossy Accents, Jasart Voyager watercolour discs, Faber-Castell watercolour pencils, #2 round paintbrush, Perfect Layers Tools, Zig Millenium .005 black pen, Stamping Platform, cardstock - American Crafts black, white card base (Anko - K-Mart Australia)

Dies:  Sizzix Drifting Hearts Thinlets #663451A, Spellbinders Labels Trio Shapeabilities S3-147 (retired), Lifestyle/Quickutz Nesting Circles L-CC-001

Punches:  EK Success Arrows border

Trimcraft Me to You Sweet Shoppe Valentine's Day card

Hi everyone 😀

Today I am sharing a card that I gave to my daughter for Valentine's Day:

I made the card on the 13th February so was a very last-minute make.  Our cat Ruby has been terribly sick these past 2 weeks so I have been very busy looking after her and had multiple Vet visits, blood tests etc.  The blood tests came back with nothing so it is a real puzzle but at least it's not kidney failure.  Ruby is now 13 so not a young cat and it's such an ordeal for her to take her to and from the Vet.  The next step will be an ultrasound and X-rays and the Vet is thinking it might be something neurological which doesn't sound too good.   Hopefully she will be OK.

Anyway, back to my card........ My photo editing program isn't working properly so I had to use a different one which had me tearing my hair out.  And even then, I could not figure out how to save it as a smaller file so ended up using the old program Paint to resize it.  So frustrating when you have used a program for over 10 years and suddenly it stops working - and wrapping my old brain cells around something else isn't a quick process.  Thank goodness for Google to search how do stuff.  I find the 'Help' that is attached to programs really UN-helpful and it's so much easier and quicker to understand it when someone posts a You-Tube video on how do something.  The colours on the card are actually a bit lighter in real life but this was the best I could do with the other program.

I am entering my card in the following Challenge:

Splitcoaststampers - Free for All F4A265 - Hearts and/or Flowers

The main image is by Trimcraft - Me to You (Tatty Teddy) Sweet Shoppe decoupage kit which is from some years ago.  Makes it so easy to layer the images together when all the pieces are already diecut 😀   Tatty Teddy is holding a sweet/lolly/candy in case you couldn't figure out what it is.  Inside the card, it says:  "You are so sweet".   My daughter and I are BIG Tatty Teddy fans so I have a little stash of Tatty Teddy papercraft products that have been released over the years.  I layered the image onto some mint cardstock and rounded the corners with my Corner Chomper then popped the panel up on foam tape.

Here is a close-up so you can see the dimension on the image:

All the designer papers are by Cocoa Vanilla - Unforgettable - 6" x 8" paper stack which just happened to match the image perfectly.  The punched pink cardstock border was made using my old favourite edge punch - Martha Stewart Lace Heart border.  I glued the leftover punched hearts around the image just to fill in some of the blank space and added some sparkle to them using a Wink of Stella clear glitter brush.

All the layers were trimmed to 1/16" and 1/8" respectively using my Perfect Layers Tools.

The sentiment is from another Trimcraft 'Me to You' range.  The twine came from my local supermarket - Woolworths (Australia) - and was part of their Valentine's Day range.

Finished size is 5-1/2" x 5-1/2" or about 140mm x 140mm.

On a happy note:  I was able to go to a Craft Show last Saturday - the first time since the Pandemic started.  It was so lovely to look at products in person and see all the new releases and card samples.   I always stock up on my staples like glue and card bases so tend to be more pragmatic in my approach so I don't have to by them online.  My favourite retailer is always Catchy Crafts as they are so upbeat and wanting to help you with anything that you need - and they always have a HUGE stand with everything you could ever need.  I buy from them online too and can highly recommend them.  No connection to them - just a happy customer wanting to support our Australian retailers. 

Thanks for stopping by!

Jocelyn

Card Recipe:

Stamps and Ink:  None

Designer Paper:  Cocoa Vanilla Unforgettable 6" x 8" Paper Stack

Accessories:  Perfect Layers Tools, Tombow Mono Multi glue, dimensionals, Corner Chomper, Trimcraft 'Me to You' Tatty Teddy Sweet Shoppe decoupage set, Sentiment - Trimcraft, twine - Woolworths, cardstock - pink, mint and white card base, Wink of Stella Clear Glitter brush

Punches:  Martha Stewart Lace Heart edge

  

Colorado Craft Company Valentine's Day Card

Hi everyone 😊

Today I am sharing a Valentine's Day card that I made for my daughter:

The main image is by Colorado Craft Company and is called Birthday Wishing.  The illustrations in this set are by Anita Jeram who is an accomplished children's book author and illustrator.  Her classic book:  "Guess How Much I Love You" was a favourite of my daughter's when she was little so when I saw this set, I had to have it. 

I stamped the image onto watercolour paper using Ranger Potting Soil Archival ink.  To turn the image into a Valentine's Day image, I masked off the balloon and drew in a heart balloon using a Uni Pin Fine Line 0.1 Sepia pen which matched the Potting Soil ink perfectly.

I coloured the image using a mix of Lyra Watercolour pencils and Jasart Voyager Watercolour discs and a No. 2 round brush.  I used a No. 4 round brush for the sky and grass.  Once the image had dried, I went over the image with my Sepia pen to darken up any lines that had got a bit lost with my colouring.

I stamped the sentiment onto black cardstock using Versamark Watermark ink and heat-set it using Stampendous Detail White embossing powder.  I diecut the sentiment using a Lifestyle Nesting Circle die and my Big Shot and punched a small hole using my Stampin' Up 1/16" hole punch. 

I layered the image onto kraft cardstock using Tombow Mono Multi glue, tied on the Pink Sorbet twine and popped the sentiment up using 2mm dimensionals.  I popped the finished panel onto a white cardstock base.

I added some sparkle to the balloon and the bunny's cheek using my Wink of Stella clear glitter brush.  Lastly I added some pale pink hearts which I picked up at a Craft Show back in 2019.  There is no brand name on the pack.  

I think you could use the card for many occasions such as an Anniversary or Friendship.

This is also my card for the following Challenges:

Cute Card Thursday - Challenge #673 - CAS  

Craft Catz - Challenge #538 - Anything Goes with Optional Twist of Metal  

Thanks for stopping by!  Hope to see you again soon. 

Jocelyn

Card Recipe:

Stamps:  Colorado Craft Company - Birthday Wishing AJ373 - clear set

Ink:  Ranger Potting Soil Archival, Versamark Watermark

Designer Papers:  None

Accessories:  Stampin' Up Embossing Buddy, Stampendous Detail White embossing powder, Heat Gun, Lyra Watercolour Pencils, Jasart Voyager watercolour discs, #2 and #4 round paintbrush, Twine, Wink of Stella clear glitter brush, pink hearts, 2mm dimensionals, pale pink hearts (from stash), Tombow Mono Multi glue, Tacky glue, 140lb Watercolour Paper, Kraft and Black cardstock, White card base 

Dies:  Lifestyle Nesting Circles

Punches:  Stampin' Up 1/16" circle handpunch

Docrafts Forever Friends Kraft Notes Thank You Card

Hi everyone😊

Today I am sharing a 'Thank you' card that I made for a friend:

All the designer papers and the main image are by Docrafts from their Forever Friends Kraft Notes Collection which came out years ago.  I have always loved this collection and made alot of cards using it.  

All the layers were trimmed to 1/16" using my Perfect Layers Tools.

The side panel was punched using a Martha Stewart Pinking Scallop edge punch.

The sentiment is by Stampin' Up! and came from their Looking Up Card Kit (still in their current catalogue).  Just as an aside:  this is a fantastic Card Kit and everything is included - even the ink pad - and the cards are perfect for guys.  You can find it HERE.   I stamped the sentiment using Versafine Vintage Sepia ink which I thought matched the rest of the card's muted tones.  I diecut the sentiment using my Big Shot and a Spellbinders Oval Nestabilities die and layered it onto the pink designer paper which was diecut using a Spellbinders Scalloped Oval Nestabilities die.  I added a Kaisercraft Epoxy Sticker from their Candy collection.  I just looked online and it appears that they have been discontinued.....sigh.....wish I had bought more of them......

You can't tell from the photo but I added sparkle all over the heart using a Wink of Stella Clear Glitter brush. 

Lastly, I tied on some ribbon from my stash and popped the card front onto a white card base using Tombow Mono Multi glue.  Finished size is 5-1/2" x 5-1/2" or approximately 14cm x 14cm.

I think you could use this image for many occasions - love, anniversary, Valentines, friendship.

Thanks for visiting my blog today!

Jocelyn

Card Recipe:

Stamps:  Sentiment from Stampin' Up! Looking Up card kit

Ink:  Versafine Vintage Sepia

Designer Paper:  Docrafts Forever Friends Kraft Notes (retired)

Accessories:  Image from Docrafts Forever Friends Kraft Notes (retired), Big Shot, Perfect Layers Tools, Wink of Stella Clear Glitter brush, dimensionals, Tombow Mono Multi glue, Kaisercraft Candy epoxy stickers (discontinued), ribbon (stash), white cardstock & white cardstock base

Dies:  Spellbinder Oval and Scalloped Oval Nestabilities

Punches:  Martha Stewart Pinking Scallop edge

Penny Black Purr-fectly Sweet Valentines card

Hi everyone

Just stopping in to share a card that I made for my daughter for Valentine's Day just to say how much I love her.  I used one of my new purchases - a Penny Black stamp called Purr-fectly Sweet - no surprise there I guess!

This is also my card for the following Challenges:

Incy Wincy Designs - Love 
Glitter 'N' Sparkle - Challenge #226 - Love is in the Air
Splitcoaststampers - Free for All Friday F4A363 of Make a Valentine  

I must find some new Challenge blogs as many of the ones that I have entered over the years have stopped.  If you have any suggestions, please leave a comment and let me know.

I stamped the image onto Bristol Smooth White cardstock with Ranger Archival Jet Black ink then coloured it with a mix of Faber-Castell Watercolour pencils and Tombow pens and my paintbrushes.

I started the card after dinner the day before Valentine's Day and had this bright idea late that night to paper-piece the I, HEART and U which I did - but then realised I would need to paper piece the cat paws as they were holding the sign and therefore should be on top of the I, HEART and U.  So I reinked just the paws and coloured them and then cut them out which was very, very fiddly but worth the result I think :-)  I went around all the cut pieces using a Copic black fineliner pen to hide the white parts where I trimmed.  I even found the stray paw that I had already cut which had adhered itself to the sleeve of my top without needing to redo it ha ha!   So, with all the extra fiddling around, I ended up not finishing the card in time for this morning (Valentine's Day) - oh well!  But I do like how the paper-piecing ties it all in with the rest of the designer papers.  I diecut the image with my Big Shot and a Lawn Fawn Stitched Rectangle die.

Here is a close-up of those sweet cats:

 
The gorgeous designer papers are by Queen and Co. and came with their Heart Throb Kit which I purchased directly from them in the USA as I couldn't find a stockist here in Australia.  It got here on the 13th so was just in time for making my card and I was very impressed with how quickly it arrived from when I ordered it.  I really, really love the colours in this pad and definitely would love to get another pad as I can honestly say that I love every single sheet in the pad which I don't often say about paper pads as there are always a couple that I am not as keen on.  Luckily, you can purchase the paper pad separately and you don't have to buy it with the kit.

The 3 different cardstocks I used were from my stash - no names of the colours or the brand(s) as I stocked up on cardstock when my local Scrapbooking store closed a few years ago (sniff!).

I used my EK Success Arrows border punch to punch tiny hearts from some of the designer papers (the leftover punches from using the punch look like tiny hearts) and glued them on using Tombow Mono Aqua glue.

And of course, I had to add plenty of glitter and glitterized the I, HEART and U and all the tiny hearts plus the cheeks on the cats using Stampin' Up Dazzling Details glitter glue.

The side panel was punched using a Martha Stewart Pinking Scallop edge punch and all the cardstock layers were trimmed to 1/16" using my Perfect Layers Tools.  The organza ribbon was added in 2 separate elements and the bow itself was made using my Bow Easy.

I added 3 pink rhinestone hearts to the bottom right-hand side which I bought from KMart.  It comes as a pack of self-adhesive gems that you are meant to add to your mobile phone or other devices but I find them very handy for cards as you get all different shapes and sizes and colours plus they weren't very dear.

I wondered about adding a sentiment to the card but thought that the banner was enough.

Lastly, I added my card front to a white cardstock base.

When I went to stamp the sentiment inside my card, I actually stamped it portrait instead of landscape like the card front as I wasn't thinking....ughh....so I had to cut off that half of the card base and attach it to a new card base and stamp the sentiment the correct way.  This made the card front very heavy so it doesn't stand up very well - oh well, what can you do......?!!

I think you could use this image for a Wedding Anniversary or just to tell someone that you love them.

Thanks for visiting my blog today!

Jocelyn 


Card Recipe:

Stamps:  Penny Black Purr-fectly Sweet clear stamp 30-398

Ink:  Ranger Archival Jet Black

Designer Paper:  Queen and Co. Heart Throb 6" x 6" pad

Accessories:  Big Shot, Perfect Layers Tools, pink heart gemstones (KMart), Bow Easy, organza ribbon (stash), Stampin' Up Dazzling Details glitter glue, Faber-Castell watercolour pencils (Riot Art and Craft), Tombow pens, #2 round paintbrush, flat paintbrush, dimensionals, Copic black fineliner pen, Tombow Mono Multi and Aqua glue, doublesided tape, cardstock - pale pink, pale chocolate, pale aqua, white card base, Bristol smooth white

Punches:  Martha Stewart Pinking Scallop edge, EK Success Arrows border

Dies:  Lawn Fawn Stitched Rectangles

Penny Black It's from You Wedding Anniversary card

Hi blogging friends

Yesterday, my husband and I celebrated our 27th Wedding Anniversary.  It is hard to believe we married in 1989; the time has gone so quickly!  My husband is a wonderful man - kind, caring, supportive and patient - I feel very blessed.  
And this is the card that I made for him:

This is also my entry for the following Challenges:

Incy Wincy Designs - Colour me Wonderful - use your favourite colouring medium:  mine is watercolour pencils/Tombow pens.

Little Red Wagon - Challenge #336 - Celebrate - any occasion from birthday to Christmas - mine is a Wedding Anniversary of course!

In the Pink - Challenge #91 - Dies and/or Punches - and your card must be predominantly pink - I used Stitched Rectangle dies, tiny punched pink hearts and punched pink glitter hearts.

Splitcoaststampers - F4A312-Pretty In Pink - Make a card with PINK in it.  For extra points use glitter. 

Luckily, my husband loves cute and cuddly critters and he loves cats so I thought this Penny Black image "It's from you!" would be perfect for him - and well, you know how much I love Penny Black images!  I love the excited expression on the cat's face:  Margaret Sherry is so wonderful at capturing expressions on the images that she illustrates.

I stamped the image onto Ranger Distress watercolour cardstock using Ranger Archival Jet Black ink and coloured it with Tombow pens + Albrecht-Durer watercolour pencils using a round paintbrush.  I lightly chalked around the image using Kaisercraft blue chalk then added some subtle I-Kandee pearlescent pink chalk here and there (unfortunately not really evident on the photo).  Here is a close-up:

I decided that I would paper-piece the envelope plus the card that the cat is holding - including the hearts on the card so stamped those parts of the image onto some designer paper from the same pad that I used for the paper on the card base.  I cut them out then went around the edges using a black Copic fineliner pen to hide the white edges and glued them on using Tombow Mono Aqua glue.  I then re-stamped the paw that is holding the card, coloured it, cut it out, went around the edges with the black pen then popped it up on a dimensional.  You can see the dimension in this photo:

Because I can get away with a little bit of sparkle and glitter on my husband's cards, I used a Wink of Stella clear glitter brush to go over the paper-pieced card and envelope.  I love how it adds a bit of subtle sparkle (even if you can't really see it much in the photo).  

I used an EK Success Arrows Border Punch to punch some tiny hearts from the designer paper (they are the leftover punchies that look like tiny hearts) and glued them around the image then added some Stampin' Up Dazzling Details glitter glue using a tiny paintbrush.

I diecut both the image and the black cardstock using Lawn Fawn Stitched Rectangle dies.  These dies are a recent purchase and gosh, they cut so beautifully.  I have always been very impressed with Lawn Fawn dies - fantastic quality and cut in just one pass in my Big Shot.

All the designer papers are by Bo Bunny from their pad Love Letters.  The black cardstock base was trimmed to 1/8" using my Perfect Layers Tools.  I tied on the cream ribbon then punched three hearts from pink glitter cardstock using a Carl CP-8 heart duo punch (I used the largest heart from the punch) then popped them up on dimensionals on the bottom right-hand side of the card.  I didn't think I needed a sentiment on the front of the card and just added one inside.

Lastly, I added my card front to a white cardstock base.  I think you could use this card for Valentine's Day as well as an Anniversary - or simply to say 'I love you'.

Thanks for stopping by!   Hope to see you again soon!

Jocelyn


Card Recipe:

Stamps:  Penny Black It's from You! 2859J wood-mount

Ink:  Ranger Archival Jet Black

Designer paper:  Bo Bunny Love Letters 6" x 6" pad

Dies:  Lawn Fawn large and small Stitched Rectangles

Accessories:  Big Shot, Wink of Stella clear glitter brush, Kaisercraft blue chalk, I-Kandee pearlescent pink chalk, Stampin' Up Dazzling Diamonds glitter glue, Tombow pens, Albrecht-Durer watercolour pencils, #2 round paintbrush, tiny round paintbrush, Tombow Mono Aqua glue, double-sided tape, dimensionals, scissors, Copic fine black multiliner, cream grosgrain ribbon, Perfect Layers Tools, Cardstock: black, white, dark pink glitter, Ranger Distress watercolour

Punches:  EK Success Arrow border, Carl CP-8 heart duo

Lili of the Valley James - Big Heart Valentine's Day card

Hi blogging friends 

Today I am sharing a Valentine's Day card that I made for my daughter.  Even if you don't celebrate Valentine's Day per se, I think it is a great opportunity to send a card to someone to say how much you care about them.  My daughter and I also celebrated the occasion by baking some chocolate cupcakes and iced them with pink strawberry icing and sprinkles - yum!  

This card is also for the following Challenges:

Suzy Bee's Bloomin' Challenge 67 of Anything Goes with a Twist - add a bow

Craftyhazelnut's February Patterned Paper Challenge which is 'Anything Goes' but Hazel must be able to see that you have used patterned paper as the whole idea of the challenge is to use up your stash of patterned paper - and let's face it, many of us have enough to keep us going for 10 lifetimes (I know I do LOL!).  And yet the lure of a fresh paper pad is so hard to resist........

I bought this adorable teddy bear stamp - James Big Heart - from Lili of the Valley UK just before Christmas but it hasn't seen ink till now.  I stamped the teddy using Memento Tuxedo Black ink onto KW Doggett smooth white cardstock and coloured the teddy using Prismacolor + Derwent Coloursoft + Lyra coloured pencils and Odourless Mineral Spirits ie: the Magic Coloured Pencil technique aka Gamsol Magic - then coloured around the teddy using blue chalk.

I paper-pieced the heart and ran a soft grey Tombow pen around the outer edge to try and give it some 'roundness'.

I stamped the teddy again onto a scrap piece of cardstock and coloured the flower and the paws holding the heart - then cut them out and popped them up on dimensionals.  I also went around all the edges of the paper pieces with a Copic black multiliner to hide the white of where I cut.  You can see a little of the dimension in this close-up here:

Here is another angle to help you see the dimension:

I went over any areas that needed the blackness touched up especially around his eyes and nose with a Copic black multiliner then used a white gel pen to redo the white dots in the eyes and nose.

The sentiment is also from LOTV from their newly released set 'Happy Bears' which has lots of teddy bear images and sentiments - see HERE.

All the designer papers are by Crate Paper - Love Notes - which I picked up from Spotlight late last year.  It is a gorgeous pad with soft reds and light teal colours - right up my alley!

I used a Wink of Stella clear glitter pen to add some subtle glimmer to the heart and rose which is very hard to see in the photo.   The centre panel was trimmed to 1/8" using my Perfect Layers Tools.

The light teal organza bow was made using my Bow Easy and I added Fray Stop to the cut ends to stop them from fraying.  I glued the bow on using Fabric glue.  

I used an EK Success Arrows border punch to punch some tiny little hearts from the soft red cardstock (they are the leftover punchies that look like tiny hearts) and glued them around the teddy using Tombow Aqua glue.  Here is a close-up of that sweet teddy bear:

Once I had layered up the card, I attached a white cardstock base which was diecut using a circle die except that I moved the die up so that I still had a fold at the top.  The next photo explains what I mean if I am not making any sense:

I usually make my card fronts first then attach the front to a white cardstock base (unless it's a one-layer-card of course).

I think you could use this LOTV image for a Wedding Anniversary or Engagement too.

And now I thought I would share the gorgeous Boofle card that my daughter gave to me:

The papers and butterflies are by Kaisercraft from their Enchanted Garden collection.  The twine was saved from a clothing tag and the rhinestones are also by Kaisercraft.

My daughter knows that I love Boofle so I received a Boofle Gift bag filled with lots of lovely goodies.

Thanks for visiting my blog today.

Jocelyn


Card Recipe:  

Stamps:  LOTV James - Big Heart ST483, sentiment from LOTV Happy Bears SET088

Ink:  Memento Tuxedo Black

Designer Paper:  Crate Paper Love Notes 6" x 6" pad (2013)

Dies:  Lifestyle Nesting Circles and Nesting Scalloped Circles

Accessories:  Big Shot, dimensionals, Prismacolor + Derwent Coloursoft + Lyra coloured pencils, Odourless Mineral Spirits, paper stumps, Kaisercolour blue chalk, light teal organza ribbon, Fray Stop, Bow Easy, cardstock - soft red, light teal + KW Doggett Smooth White, Perfect Layers Tools, Wink of Stella Clear glitter pen, Black Copic multiliner 0.05, white gel pen, soft grey Tombow pen, Tombow Aqua glue, Stampin' Up Fuse Fast adhesive, Fabric glue

Punches:  EK Success Arrows border punch